- 有限元分析常用材料参数手册
- 辛春亮 薛再清 涂建 王新泉 孙富韬编著
- 398字
- 2021-03-31 17:29:10
RHA钢
表2-231 Johnson-Cook模型参数
J F MOXNES. A Modified Johnson-Cook Failure Model for Tungsten Carbide [C]. 26th International Symposium on Ballistics, Miami, 2011.
表2-232 ＊MAT_PLASTIC_KINEMATIC模型参数（一）
TENG HAILONG, WANG JASON. Particle Blast Method (PBM) for the Simulation of Blast Loading [C]. 13th International LS-DYNA Conference, Dearborn, 2014.
表2-233 ＊MAT_PLASTIC_KINEMATIC模型参数（二）
NANDLALL D, SIDHU R. The Penetration Performance of Segmented Rod Projectiles at 2.2km/s Using Large Number of Segments [C]. 20th International Symposium of Ballistics, Orlando, Florida, 2002.
表2-234 Johnson-Cook模型参数（一）
DAVID L LITTLEFIELD, RICHARD M GARCIA, STEPHAN J. BLESS. THE EFFECT OF OFFSET ON THE PERFORMANCE OF SEGMENTED PENETRATORS [J]. International Journal of Impact Engineering , 1999, 23:547-560.
表2-235 Gruneisen状态方程和Johnson-Cook模型参数
MICHAEL J NORMANDIA, MINHYUNG LEE. PENETRATION PERFORMANCE OF MULTIPLE SEGMENTED RODS AT 2.6 KM/S [J]. International Journal of Impact Engineering, 1999, 23:675-686.
表2-236 Johnson-Cook模型参数（二）
RAJENDRAN A M. PENETRATION OF TUNGSTEN ALLOY RODS INTO SHALLOW-CAVITY STEEL TARGETS [J]. International Journal of Impact Engineering, 1998, 21(6):451-460.
表2-237 ＊MAT_PLASTIC_KINEMATIC模型参数（三）
MCINTOSH G, SZYMCZAK M. Ballistic Protection Possibilities for a Light Armoured Vehicle [C]. 20th International Symposium of Ballistics, Orlando, Florida, 2002.
表2-238 ＊MAT_PLASTIC_KINEMATIC模型参数（四）
KEVIN WILLIAMS. Validation of a Loading Model for Simulating Blast Mine Effects on Armoured Vehicles [C]. 7th International LS-DYNA Conference, Detroit, 2002.
modified Zerilli-Armstrong本构模型及其参数：
式中，σ为流动应力，C1=650MPa；C2=625MPa；ε=有效塑性应变；C3=-0.00344；C4=0.000263；
=有效塑性应变率；C5=590Mpa；n=0.41；T=温度。
表2-239 Mie-Gruneisen状态方程和HULL模型参数
CULLIS I G, LYNCH N J. PERFORMANCE OF MODEL SCALE LONG ROD PROJECTILES AGAINST COMPLEX TARGETS OVER THE VELOCITY RANGE 1700. 2200 M/S [J]. International Journal of Impact Engineering, 1995, 17:263-274.
表2-240 ＊MAT_PLASTIC_KINEMATIC模型参数（五）
LOU KEN-AN, PERCIBALLI WILLIAM. Finite Element Modeling of Preloaded Bolt Under Static Three-Point Bending Load [C]. 10th International LS-DYNA Conference, Detroit, 2008.