How to do it...

Here we'll go through the steps to configure dynamic routing on the Distributed Logical Router:

1. Navigate to Networking & Security | NSX Edges
2. Select the DLR-01 that was configured in the earlier recipe:

3. Navigate to Manage | Routing | Global Configuration. Click Edit in the Dynamic Routing Configuration pane:

4. Choose the LS-TRANSIT logical switch as the router ID and select Enable Logging, with the Log Level set to Info, click OK to complete the configuration:

5. Click Publish Changes.
6. Select the BGP configuration menu under the Routing tab:

7. Select Edit on the BGP Configuration menu, configure the BGP AS number for private AS 64512, and click OK:

8. Click Publish Changes.
9. Select Add under the Neighbor configuration pane, configure as per the following screenshot, and click OK to complete:

10. Click Publish Changes:

11. Navigate to the Route Redistribution configuration pane
12. Select Edit under the Route Redistribution Status pane:

13. Change the route redistribution from OSPF to BGP, as per the following screenshot. Click OK to complete:

14. Under the route redistribution table pane, click Add:

15. Click Publish Changes.
16. Navigate to Global Configuration and review the routing configuration is the same as the following screenshot to complete: